KENWOOD KAC-M5001 600W Mono Compact Digital Amplifier for Car, Marine, UTV & Motorsport Vehicles, Solid Corrosion-Resistant Aluminum Chassis, IPX6, IPX7 & IP6X Certified and Vibration-Proof

IPX6: Protection against Powerful Water Jets / Water projected in powerful jets, up to 12.5mm (0.49 inch) against the amplifier from any direction shall have no harmful effects. IPX7: Protection against Immersion, up to 1 m (3 feet, 3 inches) depth / Restricts harmful amounts of water entry when the amplifier is immersed in water under defined conditions of pressure and time, up to 1 m (3 feet, 3 inches) of submersion. IP6X: Effective against Dust-tight / Dust entry is restricted to avoid damage to the amplifier. A Drain Tunnel Structure is employed for creating a gap between the amplifier and the installation surface. This prevents salt water and sand from accumulating on the bottom, increasing corrosion protection. Salt spray-proof: ASTM B117 salt spray (or salt fog) corrosion test simulates harsh conditions in a saltwater environment to ensure the amplifier does not corrode or fail in these harsh conditions. By adopting the Corrosion-Resistant Sealed Cast Aluminum Chassis and stainless-steel screws resistant to rust and corrosion, this amplifier achieves the highest level of durability in its class. Vibration-proof: Vibration can be damaging to the amplifier if it is not designed to withstand it. This amplifier passes a 3-axis multi-frequency vibration test. The amplifier mounting section is made of 15/64 inch die-cast material to suppress the amplification of vibration. In addition, the thick heat-transfer sheet was also placed on the substrate and the Aluminum die-cast heat sink to suppress the vibration of the substrate. Thicker terminal connection points and increased wire size enables maximum current flow and higher output for better low-frequency response and cleaner output, resulting in powerful bass reproduction High-Quality PMLCAPs (Polymer Multi-Layer Capacitors) are utilized to lower distortion levels, improving the overall listening experience at higher volumes, while maintaining the integrity of the sound. Wired Level Water Proof Control Included

• FOR CAR, MARINE, UTV & MOTORCYCLE - Add clarity to a subwoofer in land or water with the KENWOOD KAC-M5001 Mono Class D Digital Amplifier. With double the power than its competitors, at 600W Max (300W x 1 RMS), enjoy unmatched sound quality for your favorite tracks
• BUILT TO LAST - The Corrosion-Resistant Aluminum Sealed Chassis and stainless-steel screws ensures high durability, while the Drain Tunnel Structure creates a gap between the amp and the installation surface that prevents accumulation of saltwater & sand
• WATERPROOF, DUSTPROOF & SALT-SPRAY RUSTPROOF - IPX6, IPX7 & IP6X certified, the amp is protected from powerful water jets up to 12.5m, submersion up to 1m, and ingress of dirt. The ASTM B117 salt spray (or salt fog) test ensures protection from corrosion
• DAMAGE PROTECTION FROM VIBRATIONS - The amp passes a 3-axis multi-frequency vibration test to ensure its ability to sustain vibrations. The amplifier mounting section is made of 15/64 inch die-cast material to suppress the amplification of vibrations
• DISTORTION-FREE AUDIO - The high-quality PMLCAPs (Polymer Multi-Layer Capacitors) reduce distortions, improving the overall audio quality even at higher volumes, while the magnetic shielding for the output coils reduces radiated noise for accurate sound