Led Light Switch | Transmitter | Receiver | Remote Control - Dc12v 24v 36v 4ch Wireless - - (Color: A)

1.Working Voltage: DC12V-36V2.Current:Standby less than 10mA,Working less than 128mA3.Working Temperature: -10'C—+60'C4.Receiver Frequency: 433.92MHZ5.Receiving Sensitivity: -105dB6.Output State: Switching Value7.Max Load:10A Relay, Resistive load less than 8A,Inductive load less than 3A8.Case Size:96* 80 * 29mmEncoding Type: Learning CodeAdd transmitter by the Learning Button on the receiverAbout Working way:Working way changed by Learning buttonMomentary: Press the Learning Button 1 times.Relay: Press and hold -> On. Release -> Off.Toggle: Press the Learning Button 2times.Relay: Press -> On. Press same button again -> Off·Latched:Press the Learning Button 3 times.Relay: Press -> On. Press other button -> Off.2channel Momentary+2channel Latched: Press the Learning Button 4 times.2channel Momentary+2channel Toggle: Press the Learning Button 5 times.2channel Toggle+2channel Latched: Press the Learning Button 6 times.About Learning and clearing Method:Learning: Press learning button, the indicator flashes and OFF, loosen finger, press any button of the remote transmitter, indicator flashes three times, meaning learning succeeds.(how many times press the learning button according to the working way you need)Clearning: Hold press learning button about 8 seconds,indicator light flashes several times and off,then press remote ,Relay did not Respond ,it means clearning code successful.Momentary-----Press the transmitter button A,the receiver relay A is ON. Release button A ,The receiver relay A is OFF ,The same as B/C/DToggle--------Press the transmitter button A For 1 time ,the receiver relay A is ON. Press button A again,The receiver relay A is OFF ,The same as B/C/DLatched------Press transmitter button A,the receiver relay A is ON,the relay B/C/D is OFFPress transmitter button B,the receiver relay B is ON,the relay A/C/D is OFF

• Color: A