Rogowski AC Current Probe Oscilloscope Probe High Voltage Differential Probe Kit Portable Multifunction

IntroductionThe RCP500 Rogowski AC Current Probe measures AC current up to 500A pk, minimum to 200mApk, with bandwidth ranging from 15Hz to 300KHz, 1% accuracy, and has less than 2mV noise.It adopts the Rogowski coil current measurement system: within the range, the output signal of the system and the current signal to be measured are always linear, so the accuracy will not change with the current; the coil does not contain magnetic saturation components and no magnetic core and saturation phenomenon, no trouble of heating; the Rogowski coil does not contain ferromagnetic materials and so has no hysteresis effect, the phase difference between the output signal and the current waveform is extremely low, which can be less than 0.8° .The RCP500 is compactly designed with exquisite appearance, It can be used with PA05 adapter to any other manufacturer's oscilloscope.SpecificationsModel: RCP500Bandwidth: 15-300KHz(-3dB ) Current range：200mApk-500ApkOutput Connector：Powered BNC / External BNCOutput Sensitivity：10mV/ATypical Accuracy：1%Phase Accuracy：0.8° (45Hz-66Hz)Temperature Coefficient：Operating temp. range + 0.05 × Accuracy Specification / (23±5)Conductor Positional Accuracy：Within ±1% (Deviation from the Center)Influence of External Magnetic Fields：1.5% f.s. or below (400A/m,50Hz/60Hz)Offset Voltage：±1mV or belowMax Voltage：AC 10kV RMS (1 minute), (50Hz/60Hz) (Rogowski coil part only)Output Impedance：High resistance<;2mv rmsConductor Under Test Diameter：50mmPower Supply：DC 5VCoil to Integrator Cable Length：2m (customizable)Integrator Dimensions：37*22*82mmRogowski Coil Inner Diameter：50mm(customizable)Rogowski Coil Thickness：Approx. 6mmEnvironmental CharacteristicsOperating Temperature：-20-70Storage Temperature：-30-70Operating Humidity：Max 80%,no condensationOperating Altitude：2000m==========

• 1. It is a transducer that allows your oscilloscope to measure current waveforms.
• 2.The current probe is Friendly in use: turn on, clamp it over a conductor, and get a reading;
• 3.If connected to an oscilloscope via a BNC type connector, you can observe current waveforms.
• 4.The oscilloscope current probe is with Accurate circuit measurement.
• 5.【Application】Power circuit measurement and malfunction analysis; Frequency converter (or other electronic components) measurement engine; Power electronic equipment measurement.