Thmoother Led Strip Black U Channel Diffuser 10-Pack 6.56Ft,17X7.5Mm Surface Mounted Tape Light Aluminum Track With Milky Cover Cabinet,Stairs,Counter,Wall Flush Installed Low Profile

Why need a channel with diffuser ?

1.Protect the exposed strip from Dust,Moisture and inadvertent touch,extend the lifespan of the strip
2. Provide a New Professional Clean finish to the exposed fixtures,Take your LED strips to the next level
3. Breake up the harshness dots from the led strip without making light too dim, evening out the lights to a fairly smooth glow.
Steps for a DIY Lighting Project
1.Measure the width of the strip ( make sure it is not oversized in the channel ) and test it
2.Trim the channel and cover to a required length by hacksaw or other devices if needed .
3.Fix The Clips into The working surface By Screw and Press the Channel Into Clips
4.Peel off the sticky at the back of the strip ,lay the strip in the channel
5.Snap the cover into the slot and Press From 1 side to another ,fix the end caps if needed
6.Wiring
Packing details
1.6.56FT/200CM Aluminum Channel -10 pieces
2.6.56FT/200CM Plastic Milky Cover -10 Pieces
3.Stainless Steel Countersunk Screw -40 Pieces
4.Stainless Steel Mounting Clips -40 Pieces
5.End Cap With Hole -20 Pieces
6.End Cap Without Hole-20 Pieces