TOPCHANCES High Precision LCD Digital Dynamometer Force Measuring Instruments Thrust Tester Digital Push Pull Force Gauge Dynamometer Pressure Tester Meter

The key introduction OFF/ON(start up ,shut down key):when press this key,turn on the power,appear measuring interface.Press this key again can shut down gauge. ZERO(zero key)The testing value on the screen can be zero when click this key. UNIT( switch unit key)It can switch three different unit s when click this key. Maximum load: 500N / 50Kg / 110Lb Load division value: 0.1N / 0.01Kg / 0.01Lb Sensor Structure: Inside Accuracy: ± 0.5% Power: 3.7V lithium battery Charging time: 4 ~ 6h Continuous battery use time: about 15h Battery Life: ≥300 times Charger: Input (AC 220V 50HZ), output (DC 5V 1000mA) Operating temperature: 5-35 ℃ Transport temperature: -10-60 ℃ Relative Humidity: 15% -80% RH Package include: 1 set of Dynamometer

• After turn on,enter into the measuring interface,click “SET” button can enter into the peak mode directly,record the Max. force value during measuring.
• Push pull force shows:do not move the gauge,the above arrow shows the pull force,the below arrow shows the push force.
• Digital display,easy reading;unit display:Lb,Kg,N ;In light weight,small size,easy to carry.
• Three units:N(newton),kg(kilogram),lb(pound) display respectively ,press “UNIT” button to switch .
• The battery has over-load protection in case of short circuit and leakage of electricity .It also can tell you when the battery is running low.It adopt the 3.7V lithium battery and auto shut off with no operation in 10 minutes at the same time.