Track Saw Parallel Guide System with Mirco Adjustable Flip Stop and Zero Calibration Compatible with Festool, Compatible with Makita, Track Saw Guide Rail, for Woodworking Repeatable Rip Cuts

Easy to Setup: 1. slide the connect inserts into track saw guide rails and locks in square and security. 2. connect the t track to the bracket until touch the edge of the bracket and lock the screws. 3. slide the flip stop into the t track and connect the calibration rod to the flip stops.(Make sure the rods that you tighen the plastic head and tighen it to the flip stops.) 4. move the flip stop and the plastic head to just touch the square ruler edge and rotate the zero calibration knob and move the scale indicator align the scale of 0 scale and the zero calibration is finished Imperial scale system: standard repeatable cuts from 7.5 inch to 54 inch repetitive narrow rip cuts from 0 to 12 inch Mertric scale system: standard repeatable cuts from 180mm to 1479mm repetitive narrow rip cuts from 0 to 300mm Wide Compatibility: compatible with Fes-tool, Ma-kita, Tri-ton, Power-tec and WE-N guide rails Package Includes: Link board*2 Fine-adjustable limiter*2 Short slider*12 4.0mm wrench*1 3.0mm wrench*1 30CM long guide rail*2 (scale 0-47.9CM) 30CM long guide rail*2(scale 47.9-87.9CM) 30CMlong guide rail*2 (scale 87.9-117.9CM) 30CM long guide rail*2(scale 117.9-147.9CM) Sliding rod*2 Plastic plug*2 O-type screw*24 Note: Not Includes Track Saw Square, only parallel guide.

• Fast Accurate Repeatable Cuts: Our track saw parallel guide ensure fast precision repeatable cuts from 0 to 54 inch(0-1479mm). Support both standard rip cuts and narrow rip cuts. Track saw with parallel guide for breaking down sheet goods is just like the rip fence on a table saw, ensure every cut the same width without measuring and marking
• Precision Micro Adjustable: Our parallel guide for track saw provides precision micro adjustable flip stop with 0.001 inch (0.0254mm) adjust accuracy for making woodworking repeatable cuts for your track saw. The parallel guide attaches to your guide rail security and positions the cutting line of your track saw perfectly parallel to the stock's edge at the precise distance you need, support identical cutting results every time
• Multiple Parallel Cuts Capability: Provides both independent imperial and mertric scale system. Including standard and narrow cuts scales. Clear laser scale and smart flip stop indicator with magnifier glass for easy reading and accurate align. Imperial scale system supports standard repeatable cuts from 7.5 inch to 54 inch and repetitive narrow rip cuts from 0 to 12 inch. Mertric scale system supports standard repeatable cuts from 180mm to 1479mm and repetitive narrow rip cuts from 0 to 300mm
• Wide Compatibility: The parallel guide is a must-have tools and track saw accessories for track saw, compatible with Fes-tool, Ma-kita, Milwau-kee, Tri-ton, Power-tec and WE-N guide rails (Note: NOT Includes Track Saw Square, only parallel guide.)
• Easy to Setup: 1. slide the connect inserts into track saw guide rails and locks in square and security. 2. connect the t track to the bracket until touch the edge of the bracket and lock the screws. 3. slide the flip stop into the t track and connect the calibration rod to the flip stops. 4. move the flip stop and the plastic head to just touch the square ruler edge and rotate the zero calibration knob and move the scale indicator align the scale of 0 scale and the zero calibration is finished