Transistor Tester, Multi-Functional Inductance Capacitance Electronic Meter TR for NPN and PNP Bipolar Transistors

Specification: Item Type: MK-328 Transistor Tester 1. Key for automatic shutdown1. Darlington transistor can be identified by the threshold voltage of high current amplification factor. 2. Measure the gate threshold voltage and gate capacity for MOSFET. 3. Measure and display up to four decimal digit values in the right dimension. All symbols are surrounded by the probe number of the Tester.So potentiometer. If the potentiometer is adjusted to one of its ends, the tester cannot distinguish the middle pin from the end pin. 4. The measurement with resolution is 0.1° and can measure up to 50MΩ 5. Can detect and measure a capacitor. It displays numbers with up to four decimal places in the right dimension. The value can be from 30pF to 100mF. The resolution can get 1pF. 6. For those with a capacity value higher than 2μF equivalent. The serial () has a resolution of 0.01Ω and displays two significant decimal digits. 7. Up to two diodes are displayed in the correct order and diode symbol. In addition, the forward voltage is also displayed. 8. The LED is detected as a diode; the forward voltage is much higher than the normal voltage. Two-to-one LEDs are also detected as two diodes. 9. If the reverse fault voltage is lower than 4.5 V, the Zener diode can be identified 10. Measure the capacity of a single diode in the opposite direction. If the base is connected and only one collector or emitter is connected, the bipolar transistor can also be analyzed Package List: 1 x Tester 3 x Test Pen 1 x Motherboard

• 【High quality】The transistor tester made of high-quality materials, , good performance, long service life, using 1 ° metal film resistance, more .
• 【Practical】The tester has a digital display that can be clearly displayed, which is more convenient for your use, and can automatically detect the pin layout of the detected parts, which is economical and practical.
• 【Advantage】The test time of the capacitance tester is about two seconds. Only capacity or inductance measurements can extend the cycle. Only one measurement is needed to find the connection of the rectifier bridge.
• 【Wide Use】The capacitor tester can be used to measure the current amplification factor of bipolar transistors and the voltage threshold of the base emitter. It is suitable for NPN and PNP bipolar transistors, N and P channel MOSFETs, diodes, unidirectional and bidirectional thyristors.
• 【Quality Assurance】The MK-328 tester undergoes strict quality control and quality assurance, has a high safety factor, and has an automatic shutdown button operation, which can be used with confidence.