| Management number | 210167406 | Release Date | 2026/04/02 | List Price | $22.54 | Model Number | 210167406 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Specification: Item Type: Lithium Drill Material: Plastic, Metal Battery Model: 21V Li ion Battery x 2(built in) Battery Capacity: 1300mAh Rated Power: 350W No Load Speed: Maximum 3000r/min Maximum Torsion: 350Nm Maximum Clamping Diameter: Approx. 13mm / 0.51in Drilling Capacity (Wood): Approx. 15mm / 0.591in Drilling Capacity (Steel): Approx. 15.1mm / 0.594in Chuck Diameter: Approx. 13mm / 0.51in How to Use: Instructions: 1. Installing the drill bit. 1 1. Insert the drill bit into the installation hole. Then slightly rotate it to align with the mating position. 1 2. Once in position, push in the drill bit as far as possible. Pull on the drill bit to ensure it is securely in place. 2. Removing the drill bit. 2 1. Press down on the chuck cover and pull out the drill bit. 3. When charging, the charging light will illuminate. Once charging is complete, the internal electronic switch will automatically trigger to prevent overcharging. If the battery is hot (e.g. immediately after heavy use), charging will not occur. The orange standby light will illuminate until the battery cools down, then charging will commence automatically. 4. After charging is complete, the charging light will start flashing rapidly. Note: For a new battery pack or a battery pack that has not been used for a long time, it may take approximately 24 hours to fully charge the battery. Package List: 1 x Electric Drill 2 x Lithium Battery 1 x Charging Cable 9 x Socket 1 x Socket Connector 6 x Screwdriver Head 6 x Drill Bit 1 x 1 x Universal 1 x Toolbox 1 x Manual
| Voltage | 110 Volts |
|---|---|
| Brand Name | Walfront |
| Unit Count | 1.0 Count |
| Manufacturer | WALFRONT |
| Model Number | WALFRONTl6150f2x47 |
| Power Source | AC/DC |
| Included Components | no |
| Item Dimensions L x W x H | 11.81"L x 9.84"W x 3.93"H |
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form